RFID Wedge Tag is made of robust plastic material. Because of its shape, it is also named RFID brick tag.
RFID wedge tag is with very small size, can be embedded into many different assets for identification and tracking.
It is one-time-molding, completely waterproof.
APPLICATION AREAS:
■ Asset tracking and logistics
- Cable identification
- Tool or weapon inventory and management
- Key fobs for automobile immobilization systems
■ Medical and health
- Surgical instrumentation tracking
- Medical equipment status and utilization
SPECIFICATIONS:
Name | 12mm RFID WEDGE TRANSPONDER |
Model | RI-TRP-W9WK |
Functionality | Read/Write |
Memory (Bits) | 80 |
Memory (Pages) | 1 |
Operating Frequency | 134.2KHz |
Modulation | FSK (frequency shift keying) 134.2 kHz / 123.2kHz |
Transmission Principle | HDX (half duplex) |
Power Source | Powered from the reader signal (battery-less) |
Typical Reading Range | 30% of specified reading range |
Typical Reading Time | 70 |
Typical Programming Time | 309 |
Typical Programming Cycles | 100,000 |
Case material | Plastic Compound, Black |
Protection Glass | IP68 |
EMC | Programmed code is not affected by normal electromagnetic interference or x-rays |
Signal Penetration | Transponder can be read through almost all nonmetallic material |
Mechanical Shock | IEC 68-2-27, Test Ea; 200g, half sine, 3 ms, 3 axes, 6 shocks per axis |
Vibration | IEC 68-2-6, Test Fc; 20g, 1-500 Hz, 3 axes, 24 hours per axis |
Dimensions | 12x6x3mm |
Weight | 0.4g |
Operating Temperature(Read) | -25°C to +70°C |
Operating Temperature (Program) | -40°C to +70°C |
Storage Temperature | -40°C to +100°C |