RFID Brick Tag passive contactless transponders easily integrate into RFID applications requiring discreet placement of small, featherweight tags that deliver sustainable performance.
The epoxy Brick Tag HDX low frequency transponders are only 3.0 mm thick. The HDX version is read-only, and meets ISO 11784 and ISO 11785 standards.
Both withstand extreme temperatures, and provide high water, chemical and shock resistance.
Widely used in key fobs for automobile immobilizer theft prevention systems, these devices are also ideal for tool or cable inventory and tracking systems.
APPLICATION AREAS:
■ Asset tracking and logistics
- Cable identification
- Tool or weapon inventory and management
- Key fobs for automobile immobilization systems
■ Medical and health
- Surgical instrumentation tracking
- Medical equipment status and utilization
SPECIFICATIONS:
| Name | 12mm RFID Brick Tag / RFID WEDGE TRANSPONDER |
| Model | RI-TRP-R9BK |
| Functionality | Read/Only |
| Memory (bits) | 64 |
| Memory (pages) | 1 |
| Operating Frequency | 134.2 kHz |
| Modulation | FSK (frequency shift keying) 134.2 kHz / 123.2 kHz |
| Transmission Principle | HDX (half duplex) |
| Power Source | Powered from the reader signal (battery-less) |
| Typical Reading Range | ≤20 cm |
| Typical Reading Time | 70 |
| Case Material | Plastic Compound, Black |
| Protection Glass | IP 68 |
| EMC | Programmed code is not affected by normal electromagnetic interference or x-rays |
| Signal Penetration | Transponder can be read through almost all nonmetallic material |
| Mechanical Shock | IEC 68-2-27, Test Ea; 200 g, half sine, 3 ms,3 axes, 6 shocks per axis |
| Vibration | IEC 68-2-6, Test Fc; 20 g, 1 - 500 Hz, 3 axes, 24 hours per axis |
| Dimensions | 12x6x3mm |
| Weight | 0.4 g |
| Operating Temperature(read) | -25°C to +70°C |
| Storage Temperature | -40°C to +100°C |
